WORKSHOP ON INTERNET OF THINGS (IoT) HELD AT ELECTRONICS AND COMMUNICATION Dept. VVP ENGINEERING COLLEGE DATE 14TH TO 16TH OF JULY 2017 by PROF. JIGNESH PATOLIYA
DAY 1 (Following topics were covered)
- BASIC INFORMATION ON IoT
IoT is also known as internet of things through which we can control the appliance and other heavy machine by remotely.
- WHAT IS IoT AND ITS DEFINATION
IoT is the only environment which includes three layers in which perception, network and application layers are included.
- WHERE THE INTERNET OF THE THINGS IS USED?
Remotely controlling the appliance.
- TYPES OF BOARDs USED IN IoT MEMORY SPECIFIED AND IT’S SEGREGATION.
- WHAT IS ARDUINO?
- PROGRAMING OF ARDUINO WITH DIFFERENT EXAMPLES.
By using sketch and its inbuilt examples Included.
- WHAT IS NODE Microcontroller?
Node MCU is using the ESP8266 and by its help the SoC is made which is known as NODE MCU.
- PROGRAMMING OF NODE MCU
Programming is done with the help of sketch of Arduino by simply selecting the module in option the format is same as the arduino is worked.
- HOW TO COMMUNICATE SERIALLY
This is done by using the serial library in arduino IDE Serial.begin (Baud rate);
- HOW TO COMMUNICATE WITH WiFi MODULE.
Which is same as the NODE MCU.
- SIMULATION ON PROTUES.
By taking all the components and placing it together in protues.
- KNOWLEDGE ON BAUD RATES.
Different baud rates for serial communication for different application as per the modules which are used for the same.
DAY 2 (Following topics were covered)
- KNOWLEDGE ON DIFFERENT SENSORS.
Sensors and its classification based on Nature.
Main two types 1) Digital Sensors 2) Analog Sensors.
The sensors which includes only two state in terms of its output than this type of sensors can be classified into Digital in Nature.
Were the output which is not in fixed manner it varies in particular range than that all the sensors are analog in nature
- PROGRAMMING ON NODE MCU FOR SENSOR (ANALOG)
This practical is done by using the AVR board using the potentiometer of its and the LED for other purpose.
- PRACTICAL WORKING WITH NODE MCU.
Programming with sketch and other software like mosquito.
Checking the interconnection within the network offline and online.
- NoT (NETWORK OF THINGS)
NoT is the network which can be used for low range and limited communication like LAN connection the appliance which are in intra network that can be controlled by this type of connection.
- IoT (INTERNET OF THINGS)
This type of network can control the things from anywhere, anytime and at anyplace.
This can be done by connection of internet which is compulsion for this type of connection.
- KNOWLEDGE ON RASPBERRY Pi.
This is the board which has very different property than arduino which includes case of Memory, Speed, SoC.
While in case of arduino we doesn’t have any facility for make it IoT directly.
- PRACTICAL WITH MOSQUITTO.
It is software which helps to communicate the NODE MCU as to make the application through it and controlling of appliance by UI. Likewise SCADA.
- KNOWLEDGE ON MOTT PROTOCOL.
MQTT is very light protocol which means no more latency and which directly indicates that it consumes very low bandwidth.